|
|
 |
|
|
 |
|
|
|
|
|
Ladle to
Tundish Shrouds
These are used to protect and control the flow of steel from the
Ladle to the Tundish. Made of Alumina Carbon quality they can be
used for both hot and cold starts. Ladle Shrouds are custom made to
meet the specific use of each customer with options to provide for
metal can, ceramic paper wrapping, porus insert etc.
Monoblock Stoppers
Monoblock Stopper (MBS) is used to control the flow of steel through
the Tundish Nozzle. It is made of Magnesia Carbon or Alumina Carbon
quality with special compositions at the tip and slag zone to suit
customer requirements. Cross pin or screw fastening or gas purging
facilities are provided as and when required.
Submerged Entry Nozzle/ Submerged Entry Shrouds
The Submerged Entry Nozzle (SEN) and Submerged Entry Shroud (SES)
protect the steel flow from the Tundish to the mould. SEN is fixed
inside the Tundish and also functions as a Tundish Nozzle. SES on
the other hand is fitted from the outside on the Tundish Nozzle. The
body is made of Alumina Carbon quality while the seat and slag zone
are made of different qualities as per customer requirements
including Zirconiz-Carbon and Magnesia Carbon quality. The SEN and
the SES are protected from the outside with a ceramic paper lining.
Convertor Tap Hole Sleeve
The Convertor Tap Hole Sleeve is used to control the flow of steel
from the converter. They are generally Magnesite based and are
isostatically pressed. |
|
| |
|
|
| |
 |
|
|
|
|
|